Wafer-scale crack-free AlGaN on GaN through two-step selective-area growth for optically pumped stimulated emission

Publication date: 1 July 2016
Source:Journal of Crystal Growth, Volume 445
Author(s): Young-Ho Ko, Sung-Bum Bae, Sung-Bock Kim, Dong Churl Kim, Young Ahn Leem, Yong-Hoon Cho, Eun-Soo Nam
Crack-free AlGaN template has been successfully grown over entire 2-in. wafer by using 2-step selective-area growth (SAG). The GaN truncated structure was obtained by vertical growth mode with low growth temperature. AlGaN of second step was grown under lateral growth mode. Low pressure enhanced the relative ratio of lateral to vertical growth rate as well as absolute overall growth rate. High V/III ratio was favorable for lateral growth mode. Crack-free planar AlGaN was obtained under low pressure of 30Torr and high V/III ratio of 4400. The AlGaN was crack-free over entire 2-in. wafer and had quite uniform Al-mole fraction. The dislocation density of the AlGaN with 20% Al-composition was as low as ~7.6×10⁸/cm², measured by cathodoluminescence. GaN/AlGaN multi-quantum well (MQW) with cladding and waveguide layers were grown on the crack-free AlGaN template with low dislocation density. It was confirmed that the MQW on the AlGaN template emitted the stimulated emission at 355.5nm through optical pumping experiment. The AlGaN obtained by 2-step SAG would provide high crystal quality for highly-efficient optoelectronic devices as well as the ultraviolet laser diode.



from #Ἀθηνᾶ via ola Kala on Inoreader http://ift.tt/1TmuxD8
via IFTTT